Tastic Plastics

The Plastic You Can Work With

Get the power of custom plastic fabrication using
simple hand tools! The ultimate DIY plastic.

It’s a Marvelous Material

Typically sold as a raw material to fabricators, innovators, hobbyists, and DIYers. It’s like lumber – not a product until you make it into something. Contact us about your application.

What could you do with Tastic Plastics?

FEATURES

Tastic Plastics are PVC plastic formulations that you can build things with - using simple hand tools you may already have in your tool box; tools you can carry to a job site for custom installations.

What can you do with Tastic Plastics? Read on for idea starters...

– Cuts and saws without cracking
– Holds up to high stress, tight screws, tight zip-ties
– Long life, won’t fatigue or get brittle
– UV resistant. Good outdoors or underground burial.
– Fire resistant. UL94-V-0. Plenum approved.
– Washable

Tastic Plastics are pliable and durable. They cut and drill easily.

There are two profiles:

the rigid flat plank with reinforcing channels for strength, and
a three-sided duct that is bendable, moldable, springy.

Carve, cut, drill, glue, bolt, screw, tape, and tie-wrap the shapes you want. Paint it. Cover it with peel-n-stick.

Create your own custom bespoke designs, from as small as a custom screw anchor, or large as a hydroponic farm.

5-13/16″ wide, 1/2″ high, 1/16″ thick
Strong as a board, light as cardboard.
Side channels have flat bottoms to work with double-stick tape.
Raised center accommodates the heads of tie-wraps.

Bendable plastic duct

5-15/16″ wide, 4″ high, 1/32″ thick
Springy, retains its shape.
Create new shape by heating with a hair dryer, or hot water, or heat gun.
Right angle sides are useful for many custom applications, or flatten them out or cut them off.